Držáky do auta

Držák telefonu nebo navigace s klipem, který umožňuje upevnění na vhodnou hranu. Držák je možné nasunout na výstupek palubní desky, nebo např. na hranu stolu či poličky. Telefon se do držáku upevní po rozevření horního klipu. Celý horní klip je otočný a umožňuje tak snadno nastavit ideální polohu telefonu. Je možné jej použít pro zařízení široká až 12 cm. Technická data Pro telefon / GPS max. 12 cm Umístění Na hranu Uchycení Klips Otočný Ano

Univerzální, magnetický držák telefonu pro upevnění na sklo, či na palubní desku. Tělo držáku je opatřeno klouby s aretačním prstencem, díky kterým je možné držák nastavit pro potřebný úhel. Silná přísavka zajišťuje přichycení i na mírně porézní palubní desky. K držáku jsou přiloženy magnetické destičky, jedna samolepící a jedna určená k vložení mezi pouzdro telefonu a samotný telefon. Po umístění plíšků je zajištěno okamžité uchycení telefonu k držáku. Technická data Umístění Sklo, palubní deska Uchycení Pomocí magnetické destičky Otočný ano, 2 klouby s aretací

Baseus Big Mouth Pro držák telefonu na přístrojovou kapličku. Silná pružina a silikonové podložky zajistí pevné uchycení jak samotného držáku, tak telefonu. Umístěním na přístrojové kapličce tak neomezíte proud vzduchu z ventilace a to jak v létě, tak v zimě. Držák je vhodný pro telefony s úhlopříčkou 4.7 - 6.5" palce a maximální šířkou 85mm, upevníte do něj tak prakticky každý telefon. Specifikace: - materiál ABS plast - vhodné pro telefony s úhlopříčkou 4,7-6,5 palcovými mobilními telefony - max šířka telefonu 85 mm - silikonové ochranné vystlání - skladný a se snadnou instalací

Univerzální, magnetický držák telefonu do mřížky ventilace automobilu. Držák lze jednoduše umístit do mřížky ventilace automobilu. Telefon stačí opatřit magnetickou samolepkou, nebo pokud je opatřen krytem, pak mezi kryt a telefon magnetickou podložkou. Podložka zajistí okamžité přichycení, při přiložení telefonu k držáku. Technická data Umístění Ventilační mřížka automobilu Uchycení Pomocí magnetické samolepky

Univerzální držák telefonu SELECT se silnou přísavkou a otočným mechanismem. Držák je opatřen univerzálním systémem uchycení telefonu, s dvojitým roztahovacím ramenem, bezpečně svírajícím telefon pomocí pružin. Základna držáku je opatřena silnou přísavkou s aretačním prstencem, díky kterému je možné držák snadno upevnit na určené místo. Ze základny lze případně snadno sejmout celý telefon včetně úchytu. Kloubový systém s jištěním navíc umožňuje libovolné otáčení telefonu a jeho zajištění v potřebné poloze. Technická data Vhodné pro telefony120 - 180 mmUmístěnípomocí přísavkyUchycení telefonuraménko s pružinamiOtáčeníkloubem s aretacíBarvačerno červená

Držák telefonu s extra silnou přísavkou a klipsem pro uchycení telefonu šířky 5,5 – 8,5 cm.Díky možnosti otáčení o 360° je možné snadno nastavit vhodnou polohu.Telefon v klipsu pevně drží pomocí silné pružiny, a proti pohybu je zajištěn pomocí protiskluzové vrstvy uvnitř klipsu.Technická datapro telefonyšířka 5,5 – 8,5 cmnastavitelný úhelano, 360°upevněnípřísavka s aretacíbarvačerná

Držák telefonu s extra silnou přísavkou a klipsem pro uchycení telefonu či navigace až do šířky (nebo výšky) 9 cm. Díky možnosti otáčení o 360° je možné snadno nastavit vhodnou polohu. Telefon v klipsu pevně drží pomocí silné pružiny, a proti pohybu je zajištěn pomocí protiskluzové vrstvy uvnitř klipsu.Technická datapro telefonydo 9 cm (šířka nebo výška)nastavitelný úhelano, 360°upevněnípřísavka s aretacíbarvačerná

Univerzální držák 2x telefonů pro upevnění na sklo, či na palubní desku. Tělo držáku je opatřeno kloubem s aretačním prstencem, díky kterému je možné nastavit potřebný úhel zařízení. Silná přísavka zajišťuje přichycení i na mírně porézní palubní desky. Držáku lze nastavit šíři 55 - 85 mm a lze jej použít jak pro jeden jediný telefon, tak rovnou dva telefony. Technická data Umístění Sklo, palubní deska Uchycení až 2 telefony šíře 55-85 mm Otočný ano, kloubem s aretací

Univerzální, magnetický držák telefonu do mřížky ventilace automobilu. Tělo držáku je opatřeno kloubem s aretačním prstencem, díky kterému je možné držákem otáčet a nastavit tak jednoduše libovolný úhel. K držáku jsou přiloženy magnetické samolepky, které se umístí na zadní část telefonu, pro zajištění okamžitého uchycení k držáku. Technická data Umístění Ventilační mřížka automobilu Uchycení Pomocí magnetické samolepky Otočný Ano, kloubem

Držák, s extra silnou přísavkou, pro uchycení telefonu až do šířky (nebo výšky) 10 cm. Šířku lze zvětšit stisknutím bočního tlačítka, telefon se poté umístí do držáku a ten se poté zajistí stiskem čelistí. Díky uzamykatelnému otáčení o 360° a flexibilnímu ramenu držáku, je možné snadno nastavit vhodnou polohu telefonu. Telefon v klipsu pevně drží díky důmyslnému mechanismu, proti poškrábání je upnutý telefon chráněn pěnovými prvky. Technická data pro telefony do 10 cm (šířka nebo výška) nastavitelný úhel ano, 360° upevnění přísavka s aretací barva černá

Univerzální držák telefonu řady LUKE pro upevnění do mřížky ventilace a umístěním telefonu jednou rukou. Držák je opatřen gravitačním systémem uchycení telefonu, kdy telefon svojí vahou působí na spodní rameno držáku, díky čemuž se stáhnou boční ramena, která telefon upevní. Tělo držáku je dále opatřeno kloubem s aretačním prstencem, díky kterému je možné držák nastavit pro potřebný sledovací úhel a dotažením zajistit. Držák lze navíc rozšířit, co do možnosti uchycení, dokoupením některé z nabízených patek řady LUKE (06321 s aretací do mřížky, 06322 klipovou patku, s aretací pomocí přísavky 06323 s nastavitelným, 06324 pevným, ale i 06325 ohebným ramenem). Technická data Vhodné pro telefonydo 6,5" (šířka 65-95 mm)Umístěnímřížka ventilaceUchycení telefonugravitační systémOtáčeníkloubem s aretacíBarvatmavě šedá

Univerzální držák telefonu řady LUKE pro upevnění do mřížky ventilace a umístěním telefonu jednou rukou. Držák je opatřen gravitačním systémem uchycení telefonu, kdy telefon svojí vahou působí na spodní rameno držáku, díky čemuž se stáhnou boční ramena, která telefon upevní. Tělo držáku je dále opatřeno kloubem s aretačním prstencem, díky kterému je možné držák nastavit pro potřebný sledovací úhel a dotažením zajistit. Držák lze navíc rozšířit, co do možnosti uchycení, dokoupením některé z nabízených patek držáků řady LUKE (06321 s aretací do mřížky, 06322 klipovou patku, s aretací pomocí přísavky 06323 s nastavitelným, 06324 pevným, ale i 06325 ohebným ramenem). Technická data Vhodné pro telefonydo 6,5" (šířka 65-95 mm)Umístěnímřížka ventilaceUchycení telefonugravitační systémOtáčeníkloubem s aretacíBarvazelená

Speciální nastavitelná patka s teleskopickým ramenem a přísavkou pro držáky telefonů řady LUKE. Patka je složena z masivní přísavky a úhlově nastavitelného, teleskopického ramene s šroubovacím zajištěním pozice. Pro lepší schopnost přísavky je v balení umístěna i samolepící podložka s průměrem 72 mm. Rameno lze nastavit v úhlu 180° a teleskopicky lze nastavit délku 11-16 cm. Zakončení patky je opatřeno kloubem, na který lze upevnit libovolný LUKE držák telefonu.

Praktický držák telefonu s nastavitelným ramenem a pogumovanými čelistmi pro upevnění.Do držáku je možné umístit telefon šíře 6,5 - 10 cm a je připevněn na kulovém kloubu jištěném maticí. Po povolení matice je možné nastavit libovolný sledovací úhel.Konstrukce je tvořena nastavitelným ramenem opatřeným dvěma klouby s ovládáním pomocí tlačítek. Tvar ramene lze jednoduše nastavit stisknutím tlačítek kloubů a uvolněním v požadované pozici, kde bude následně pevně aretován.Komplet držáku lze uchytit například na tyč hlavové opěrky, na zpětné zrcátko, na stůl a další podklady max. šíře/průměr 25 mm. Čelisti jsou opatřené gumovými vložkami, které brání poškození povrchu. Pro pevné uchycení pak slouží aretační prstenec ve spodní části, kde je navíc umístěn otočný prvek pro otáčení celého kompletu držáku.Technická datapro telefony (šířka)6,5 – 10 cmnastavitelný úhelano, 360°upevněnípomocí čelistí, max 25 mm

Držák telefonu s extra silnou přísavkou a klipsem pro uchycení telefonu či navigace až do šířky (nebo výšky) 10 cm. Díky možnosti otáčení o 360° je možné snadno nastavit vhodnou polohu. Telefon v klipsu pevně drží pomocí silné pružiny, a proti pohybu je zajištěn pomocí protiskluzové vrstvy uvnitř klipsu.

Držák pro telefon k upevnění na opěrku hlavy.Rozsah úchytu pro telefon 5 - 9 cm. Díky těmto rozměrům, je možné použít tento držák pro většinu mobilních telefonů na trhu.Držák telefonu lze díky vysouvacímu ramenu úhlově nastavit a lze jím otáčet okolo osy tyčky hlavové opěrky. Držák lze na hlavové opěrce zajistit pomocí vrchního otočného prstence. Ovládání a sledování obrazu mobilního telefonu na zadním sedadle bude snadné a pohodlné i na dlouhých cestách. Držák je navíc opatřen výstupkem pro možnost uchycení tašky s lehkým obsahem. Technická data rozsah úchytu telefonu5-9 cmnastavitelný úhelano, pomocí rameneotočnéanozajištěníano, prstencem

Univerzální držák telefonu řady LUKE pro upevnění do mřížky ventilace a umístěním telefonu jednou rukou. Držák je opatřen gravitačním systémem uchycení telefonu, kdy telefon svojí vahou působí na spodní rameno držáku, díky čemuž se stáhnou boční ramena, která telefon upevní. Tělo držáku je dále opatřeno kloubem s aretačním prstencem, díky kterému je možné držák nastavit pro potřebný sledovací úhel a dotažením zajistit. Držák lze navíc rozšířit, co do možnosti uchycení, dokoupením některé z nabízených patek držáků řady LUKE (06321 s aretací do mřížky, 06322 klipovou patku, s aretací pomocí přísavky 06323 s nastavitelným, 06324 pevným, ale i 06325 ohebným ramenem). Technická data Vhodné pro telefonydo 6,5" (šířka 65-95 mm)Umístěnímřížka ventilaceUchycení telefonugravitační systémOtáčeníkloubem s aretacíBarvarůžově zlatá

Klasická patka s přísavkou pro držáky telefonů řady LUKE. Výška patky 8 cm. Pro lepší schopnost přísavky je v balení umístěna i samolepící podložka s průměrem 72 mm. Zakončení patky je opatřeno kloubem, na který lze upevnit libovolný LUKE držák telefonu.

Plastový držák mobilního telefonu s kovovým úchytem, určený k nalepení ve voze, nebo k připevnění na žebra ventilace automobilu. Nastavitelný úhel sklonu, nastavitelná šířka. Lze použít pro většinu běžně používaných mobilních telefonů. Barva imitace dřeva.

Speciální klipová patka pro držáky telefonů řady LUKE. Patka je složena z klipu šíře 2 cm s délkou 3 cm. Lze ji upevnit na hranu s max. výškou 1,5 cm a pomocí křídlaté matice zajistit. Tělo patky je v zadní části opatřeno kloubem, na který lze upevnit libovolný LUKE držák telefonu.

Speciální patka do mřížky ventilace pro držáky telefonů řady LUKE. Patka je složena ze dvou dílů. Háček jištěný posuvným členem s pružinou, pro zaháknutí za mřížku ventilace a samotný kloub s podpěrnou částí. Tyto díly stačí jednoduše zacvaknout do sebe a umístit na své místo. Tělo patky je dále opatřeno kloubem, na který lze upevnit libovolný LUKE držák telefonu.

A car holder with wireless charging. Automatically detects which smartphone is placed in the holder to ensure maximum watts of charge. Intelligent infrared sensor detects the phone, thanks to which the holder automatically closes. The firm fit ensures stabilization and safety of the phone even on uneven roads. After inserting, the wireless charging process will start, which can reach 15W. The holder will automatically detect which smartphone is placed in the holder to ensure maximum watts of charge. Supports Android fast charging up to 10W/15W. Can be charged in a case. LED backlight on the frame informing about the charging status. Large 360 ??degree adjustment range. The triangular design of the device allows for full phone stabilization. Soft silicone in the contact areas with the phone for the safety of devices. The set includes a double mounting system for a ventilation grille or cockpit / glass. Specification: Finish: PC, silicone Type of fastening: clamping Place of installation: air conditioning grille / cockpit / glass Compatibility: devices with a width of 55-92 mm Power: 5W 7.5W 10W 15W

The Forcell HS4 car holder mounted to the air vent is designed for devices that support inductive charging, including the latest foldable Samsung Z Flip and Fold phone series. It allows you to charge them with a power of up to 15 W. The rotating swivel and automatically extending arms (after pressing a button) make it easy to mount the smartphone. Thanks to the Forcell holder, you will always have your phone at hand during any trip. Mount the device vertically or horizontally thanks to the 360° swivel and automatically extendable arms (after pressing a button). Strong clamps and bottom legs keep the smartphone stable even during dynamic driving. Various adjustment options make it easy to adjust the holder to your own needs, which will be useful when several drivers share one car. The Forcell holder is suitable for both standard smartphones and those foldable from the latest Samsung Z Fold and Flip series. Moreover, it is mounted to the air vent, minimizing visibility problems and thus increasing safety while driving. At the same time, it supports wireless charging with a maximum power of 15 W. The set includes the 1 m charging cable with USB-C connectors. Specification:Mounting: air ventInput voltage: 5 V/2 A; 9 V/2 APower: 5 W/7.5 W/10 W/15 W (max.)Wireless charging distance: 6 mm (max.)Interface: USB-CCable: USB-C to USB-C (1 m)

Automatic car holder with wireless charging and an infrared sensor. Automatically opens and closes the arms. Supports inductive charging. Thanks to the built-in infrared sensor, the holder automatically recognizes the device when it is close to the accessory (5-20 cm), and then automatically opens and closes the arms when the phone is inside. The holder supports fast wireless charging. For devices that do not support inductive charging technology, use the supplied magnetic tips. The product has a built-in protection system: against overvoltage, overheating, magnetic field, short circuit. Mounted on the air vent or windshield. Specification: Model identifier: HS1 Material: PC, ABS Input: 5V / 2A, 9V / 1.67A Output: 5V / 1.5A, 9V / 1.2A Power: 15W, 10W, 7.5W, 5W depending on the phone model Charging frequency: ?80% 110K-205K Hz Charging efficiency:> 72% Charging distance: < 10mm Support: Qi wireless charging Arm spacing: 4.7"-7.2" Dimensions: 130 * 65 * 24 mm Cable length: 100 cm Weight: 97 g Place of installation: air vent, windshield

Automatic car holder with wireless charging and an infrared sensor. Automatically opens and closes the arms. Supports inductive charging. Thanks to the built-in infrared sensor, the holder automatically recognizes the device when it is close to the accessory (5-20 cm), and then automatically opens and closes the arms when the phone is inside. The holder supports fast wireless charging. For devices that do not support inductive charging technology, use the supplied magnetic tips. The product has a built-in protection system: against overvoltage, overheating, magnetic field, short circuit. Mounted on the air vent or windshield. Specification: Model identifier: HS1 Material: PC, ABS Input: 5V / 2A, 9V / 1.67A Output: 5V / 1.5A, 9V / 1.2A Power: 15W, 10W, 7.5W, 5W depending on the phone model Charging frequency: ?80% 110K-205K Hz Charging efficiency:> 72% Charging distance: < 10mm Support: Qi wireless charging Arm spacing: 4.7"-7.2" Dimensions: 130 * 65 * 24 mm Cable length: 100 cm Weight: 97 g Place of installation: air vent, windshield

A gravitational car holder with a telescopic arm for a windshield, cockpit, board or other flat surface. The automatic mechanism allows easy and quick one-handed operation. Compatible with phones with a width of 65-82 mm. Due to the gravitational technology, the handle clamps automatically under the weight of the device inserted into it. A strong clamp ensures stabilization and safety of the phone even on a very difficult road. It does not require service every time you put down the phone or want to take it. You don't need to press any buttons or use your hands to stretch it. Thanks to the triangular mounting structure and the non-scratching silicone protection mat, the phone can be held firmly and securely while traveling. 360-degree adjustment allows you to set the phone in any position, depending on our convenience and preferences. The handle can be used many times. Before changing the place of installation, it is enough to rinse the suction cup with water, wait for it to dry and reattach. The holder has a dedicated hole for the charger cable, which you can easily connect while on the road. Thanks to its compact size and free choice of mounting, the handle does not distract and does not obstruct the view, ensuring full visibility. Specification: Material: Aluminum + ABS Type of assembly: clamping, gravity Weight: 192 g Mounting: suction cup (dashboard or windshield) Compatibility: phones with a width of 65-82 mm

The Forcell Chrom III car holder is a practical accessory that will allow you to comfortably and safely use a smartphone while driving. Extendable clamps with wide spacing and a long arm with 360° rotation enable adjustment to individual needs. A 2-in-1 product with air vent and windshield mounting. Solid supportThanks to the Forcell holder, you will always have your phone close at hand during the ride. Its arms with the release button let you put the device in or out. The durable construction enables mounting the device vertically or horizontally—charging and headphone inputs will remain uncovered so you can use them comfortably the whole way through. Strong clamps will keep the smartphone in a stable position even during dynamic driving, and the soft foam protects your device from scratches. A good fitVarious adjustment options make it easy to adapt the holder to your own needs. It will prove helpful when sharing one car with several drivers. The arms spacing is so broad (40–110 mm) that you can easily attach smartphones or navigations of various sizes to it. The bottom legs will prevent the device from accidentally slipping. The long arm with 360° rotation allows you to turn the holder to obtain the right angle for your eyesight. Follow the navigation, scroll notifications, or switch songs on the screen in total safety for both yourself and the passengers. Easy mountingMade of a high-quality plastic holder that has chrome, aesthetic inserts gives you several mounting options. Thanks to the adjustable arm and the suction cup reinforced with an additional clamp, it can be placed on the windshield or on the smooth surface of the dashboard. However, if you want to minimize possible problems with visibility and thus increase safety, it is enough to dismount the arm from the holder and then place it in the air vent. In both cases, a solid clamping guarantees that the device will stay in place and not be damaged even on very bumpy roads. Specification:Color: BlackInstallation: Suction cup (windshield or smooth surface on the dashboard) and air ventArm spacing: 40–110 mmArm length: 150 mm

The Forcell Oval car holder is a practical accessory that will allow you to comfortably and safely use a smartphone while driving. Extendable clamps with wide spacing and a long arm, flexible arm enable adjustment to individual needs. A 2-in-1 product with air vent and windshield mounting. Solid supportThanks to the Forcell holder, you will always have your phone close at hand during the ride. Its arms with the release button let you put the device in or out. The durable oval construction enables mounting the device vertically—charging and headphone inputs will remain uncovered so you can use them comfortably the whole way through. Strong clamps will keep the smartphone in a stable position even during dynamic driving, and the soft foam protects your device from scratches. A good fitVarious adjustment options make it easy to adapt the holder to your own needs. It will prove helpful when sharing one car with several drivers. The arms spacing is so broad (38–107 mm) that you can easily attach smartphones or navigations of various sizes to it. The bottom legs will prevent the device from accidentally slipping. A very long arm (27 cm) allows you to set the holder at eye level. Follow the navigation, scroll notifications, or switch songs on the screen in total safety for both yourself and the passengers. Easy mountingMade of a high-quality plastic holder gives you several mounting options. Thanks to the adjustable arm and the suction cup reinforced with an additional clamp, it can be placed on the windshield or on the smooth surface of the dashboard. However, if you want to minimize possible problems with visibility and thus increase safety, it is enough to dismount the arm from the holder and then place it in the air vent. In both cases, a solid clamping guarantees that the device will stay in place and not be damaged even on very bumpy roads. Specification:Color: BlackInstallation: Suction cup (windshield or smooth surface on the dashboard) and air ventArm spacing: 38–107 mmArm length: 270 mm The offer also includes a model with a 17 cm long arm and a model with mounting only to the air vent.

Magnetic car holder with adjustable arm. It allows for comfortable and safe use of a smartphone while driving. Mounted on the windshield or dashboard. 6 built-in magnets ensure a secure grip and make the handle extremely universal; to use it, just place the metal plate on the phone or a case. Adjustable angle of inclination of 240° allows you to adjust the parameters of the product to your own needs. An adjustable arm with a length of 11.7-16 cm enables precise adjustment of the position of the device within the line of sight. 360° rotation to change the position of the device for the convenience of its use, vertically or horizontally. A strong suction cup with a sticky gel ensures a stable fit on flat surfaces such as the windshield or dashboard. Set of two metal plates included.

The Forcell Regular car holder is a practical accessory that will allow you to comfortably and safely use a smartphone while driving. Extendable clamps with wide spacing and a 17 cm long arm enable adjustment to individual needs. A 2-in-1 product with air vent and windshield mounting. Solid supportThanks to the Forcell holder, you will always have your phone close at hand during the ride. Its arms with the release button let you put the device in or out. The durable construction enables mounting the device vertically—charging and headphone inputs will remain uncovered so you can use them comfortably the whole way through. Strong clamps will keep the smartphone in a stable position even during dynamic driving, and the soft foam protects your device from scratches. A good fitVarious adjustment options make it easy to adapt the holder to your own needs. It will prove helpful when sharing one car with several drivers. The arms spacing is so broad (38–107 mm) that you can easily attach smartphones or navigations of various sizes to it. Folding bottom legs will prevent the device from accidentally slipping. A long arm (17 cm) allows you to set the holder at eye level. Follow the navigation, scroll notifications, or switch songs on the screen in total safety for both yourself and the passengers. Easy mountingMade of a high-quality plastic holder gives you several mounting options. Thanks to the adjustable arm and the suction cup reinforced with an additional clamp, it can be placed on the windshield or on the smooth surface of the dashboard. However, if you want to minimize possible problems with visibility and thus increase safety, it is enough to dismount the arm from the holder and then place it in the air vent. In both cases, a solid clamping guarantees that the device will stay in place and not be damaged even on very bumpy roads. Specification:Color: BlackInstallation: Suction cup (windshield or smooth surface on the dashboard) and air ventArm spacing: 38–107 mmArm length: 170 mm The offer also includes a model with a 27 cm long arm and a model with mounting only to the air vent.

The Forcell Oval car holder is a practical accessory that will allow you to comfortably and safely use a smartphone while driving. Extendable clamps with wide spacing and a 17 cm long arm enable adjustment to individual needs. A 2-in-1 product with air vent and windshield mounting. Solid supportThanks to the Forcell holder, you will always have your phone close at hand during the ride. Its arms with the release button let you put the device in or out. The durable oval construction enables mounting the device vertically—charging and headphone inputs will remain uncovered so you can use them comfortably the whole way through. Strong clamps will keep the smartphone in a stable position even during dynamic driving, and the soft foam protects your device from scratches. A good fitVarious adjustment options make it easy to adapt the holder to your own needs. It will prove helpful when sharing one car with several drivers. The arms spacing is so broad (38–107 mm) that you can easily attach smartphones or navigations of various sizes to it. The bottom legs will prevent the device from accidentally slipping. A long arm (17 cm) allows you to set the holder at eye level. Follow the navigation, scroll notifications, or switch songs on the screen in total safety for both yourself and the passengers. Easy mountingMade of a high-quality plastic holder gives you several mounting options. Thanks to the adjustable arm and the suction cup reinforced with an additional clamp, it can be placed on the windshield or on the smooth surface of the dashboard. However, if you want to minimize possible problems with visibility and thus increase safety, it is enough to dismount the arm from the holder and then place it in the air vent. In both cases, a solid clamping guarantees that the device will stay in place and not be damaged even on very bumpy roads. Specification:Color: BlackInstallation: Suction cup (windshield or smooth surface on the dashboard) and air ventArm spacing: 38–107 mmArm length: 170 mm The offer also includes a model with a 27 cm long arm and a model with mounting only to the air vent.

Držák do auta - TXR MAGNETICKÝ - 2 držák na sklo i mříž , šedá-černá 51030.

FORCELL CARBON H-CT322 car holder for the dashboard. It is a magnetic phone holder that increases the comfort of travel and makes using the phone easy and safe. 6 built-in magnets provide a firm grip, preventing the smartphone from falling out, and make the holder extremely universal; to use it, just place a metal plate on the phone or case. 360° rotation allows you to precisely adjust the position of the phone to your needs, horizontally or vertically. Cable clip allows you to place the cable in it so that it does not get tangled and does not interfere with your travels. Extremely compact: the small size of the product does not block the view to the road and makes it easy to store when not in use. Two metal plates included.

Magnetic car holder for the air vent. It allows comfortable and safe use of a smartphone while driving. Small size does not block visibility. 6 built-in magnets ensure a secure grip and make the handle extremely universal; to use it, just place the metal plate on the phone or a case. 360° rotation ensures precise adjustment of the phone position to your own needs. Extremely compact: the small size of the product ensures good visibility and makes it easy to store when not in use. Two metal plates included.

Magnetic car holder for the ar vent - FORCELL CARBON B060. It allows for comfortable and safe use of a smartphone while driving. Built-in 4 magnets provide a firm grip, preventing the device from falling out while driving, and makes the handle extremely universal; to use it, place a metal plate on the device or a case. Compact size does not block visibility and makes it easy to store the product when not in use. Silicone inserts prevent scratching the air vent and protect the handle from falling out even on uneven roads. Set of two metal plates included.

Elegant gravity air vent car holder. Curved tempered glass panel gives them a futuristic design. Easy to one-hand operation. Thanks to the auto clip, you only have to put the phone inside and the clips automatically suit to your phone. Wide clips offer a steady grip without phone shaking. The inner clip is protected with silicone material that can prevent minor scratches on the phone cover. The holder is fully adjustable - offers full 360 view with easy 90 horizontal and vertical angle rotations. Easy access to home button and charging port makes easy charging them during travel. Key features: - gravity technology (auto clip) - triangular anti-shock design - 360-degree full viewing angle - taking/ placing with one hand - elastic silicone soft pads Specification: Install way: air outlet (compatible with 98% of car air vent types) Material: glass + aluminium alloy Size: 9,8 x 5,2 x 3,2 cm Weight: 85 g Technology: Oxidation Compatibility: devices with 4-6 inches screens and 1,1 cm thickness max Package type: box

Practical car holder designed to be mounted on the windshield or cockpit. It has an elegant design - the carbon motif makes your interior car luxurious.Universal useThe handle has a wide arm spacing (50-85 mm) and comes with devices with screen sizes from 3"- 6";.Highly adjustableThe handle has a 360 degree adjustment. Use the phone or navigate vertically or horizontally - as you like!Stable mountingThe handle is attached with a suction cup, which additionally has a locking clip. You can mount it to the windshield or the smooth surface of the dashboard. Silicone tabs protects against slipping out. The clamp release button makes it easy to remove the phone from the holder.Modern designThe Forcell HT1 handle is an accessory reminiscent of the futuristic carbon fiber. It looks great with the interior of a modern car.Features:Place of installation: windshield or dashboardRotation: 360 degreesCompatibility: 3"-6" devices

FORCELL CARBON H-CF509 car holder for the air vent. It allows you to safely use your smartphone while driving. The unique roller system allows easy one-handed operation. Built-in rollers allow you to easily mount the device in the holder with only one hand. 360° rotation allows you to adjust the position of the device to the individual needs, vertically or horizontally. Silicone inserts prevent scratching the delicate casing of the device and prevent it from falling out. The adjustable knob allows you to increase or decrease the tightness of two small "clips" connecting the handle with the air vent, so we can be sure that the device will not fall out, no matter what the road is. The unique design with a carbon pattern makes the product look very elegant. Universal: the product is compatible with 4"-6.5" mobile devices.

Universal car holder for a smartphone. Can be mounted to the windshield or dashboard.  The handle allows convenient use of, among others smartphone navigation while traveling. Extendable clamps, a long adjustable arm with 360 degrees of rotation, and positioning the smartphone vertically or horizontally allow you to adjust your smartphone to individual needs. Convenient installation on the windshield or dashboard does not limit visibility while driving. Specification: Model: ZP-X0566Compatibility: devices with 4.7–6.8" screenArm spacing: 54.0–94.9 mmInstallation: windshield, dashboard (suction cup)Material: PC + ABS + steel + siliconeWeight: 280 g

Magnetic car holder for the air vent. It allows for comfortable use of a smartphone while driving. The built-in magnet provides a firm grip, preventing the device from falling out while driving, and makes the holder extremely universal; to use it, just place a metal plate on the device or a case. The compact size does not block visibility and makes the holder easy to store when not in use. Silicone inserts prevent the air vent from scratching. Specification: Material: ABS + silicone + metal alloy + magnet Size: 41 * 38 * 73mm Weight: 34.2 g Load capacity: 700 g Place of installation: air vent

Gravity car holder. It allows you to comfortably operate your smartphone while driving. The product is extremely versatile and smoothly adapts to the shape of the device. Attached to the air vent. Made of high-quality components: aluminum, silicone and ABS, it ensures long-term and safe use, and is also resistant to damage. The compact design makes the product easy to store and does not block visibility. After removing the device, the holder returns to its original shape, but after placing the phone in it, its structure stretches and adjusts to the shape of the smartphone, providing a solid support point for the device. Anti-shock, modern design affects the comfortable use of the phone or navigation. A strong clamp ensures a stable fixation and protects against falling out. Specification: Material: ABS + aluminum alloy + silicone Size: 115 * 44 * 90 mm Weight: 47 g Suitable for: 4.5-7 inch mobile phones (width: 64-85 mm) Place of installation: air vent

Gravity car mount to the air outlet. Perfect for devices with a width of 63mm to 88mm and a thickness of up to 11mm. 360-degree adjustment and easy assembly makes trouble free in daily use. Horizontal Flat Structure: The horizontal telescopic design will extend automatically when putting down a phone and retract when picking it up. Gravity Ganged: The clamp extends and retracts automatically with the gravity of a phone and firmly fixes the phone. Metal Design: The new bright matte metal is unfading, beautiful and more durable. Not Block Air Outlets: It is applicable to all types of vehicles without blocking the vision and air outlets, plug-and-play. Rubber caps on the jaws to ensure a solid installation without scratching the air outlet. The set includes stickers that you can use to decorate the handle. Features:Material: PC +TPEFixing: air outletCompatibility: devices with a width of 63mm to 88mm and a thickness of up to 11mm. 

Gravity car holder. It allows you to comfortably use the phone while traveling in a car, affecting driving safety. Does not require adjusting to phone size. Made of high quality materials - PC and silicone, it guarantees long-term and safe use. Automatic jaws do not need to be adjusted to the phone and close automatically when the device is placed on the accessory. The triangular structure ensures stability while driving even on uneven roads, reducing the risk of the device falling out. Universal: the product can be mounted both on the dashboard of the car and on the windshield. Strong suction cup is reusable - just rinse it with water to regain its strong suction properties. 360-degree rotating head allows you to adjust the parameters to the individual preferences of the user. Specification: Materials: PC + silicone Size: 18.5 x 11.6 x 9 cm Weight: 72 g Compatibility: devices with a width of 6.3 - 8.5 cm and a thickness of not more than 1 cm

Magnetic car holder for the air vent. It allows for comfortable use of a smartphone while driving. The built-in magnet provides a firm grip, preventing the device from falling out while driving, and makes the holder extremely universal; to use it, just place a metal plate on the device or a case. The compact size does not block visibility and makes the holder easy to store when not in use. Silicone inserts prevent the air vent from scratching. Specification: Material: ABS + silicone + metal alloy + magnet Size: 41 * 38 * 73mm Weight: 34.2 g Load capacity: 700 g Place of installation: air vent

Gravity handle for the air vent. It allows you to use your smartphone safely while traveling. Butterfly construction smoothly adapts to the shape of the device; the handle closes automatically when the device rests on it, and the side arms clamp under the weight of the phone. Equipped with a ball joint: allows you to adjust the product parameters to the driver's needs even better. Mounted to the air vent using a clip with a strong clamping spring. Designed for mobile devices with a screen size 3.5 "-6.5". Has a textured and polished structure, which makes it nice to touch. Specification: Material: ABS + PC + aluminum alloy + silicone Size: 91 * 90 * 95 mm Weight: 61g Mounting range: 60-85 mm

A light, compact HOCO car holder mounted on a air-vent. Wide-range adjustable makes you can use it with 55mm-82mm (3.5-6 inch) smartphones and GPS devices. It allows convenient and safe use of the smartphone while traveling. 360° rotatable head allows you to set the phone in a preferred position. A strong suction cup with an additional clamp clip makes the holder firmly attached to the air vent. The holder has elements stabilizing the phone on the arms and on the part of the handle adjacent to the back of the device. The adjustable arm allows you to adjust the clamp of the holder to the size of the display. The holder supports devices with a screen size of 3.5-6". The holder is made of durable PC and PVC- lightweight and solid materials which offer a comfortable touching experience. The aesthetic appearance makes the holder look good in your car’s interior. Reach of the clamping arms: 55-82mm (3.5-6") Material: PC+PVC Dimensions: 80*69*34mm Weight: 41.6g Box: Original HOCO box with eurohole

Magnetic car holder designed for mounting to the air vent. It allows you to safely use your smartphone while driving. Universal: just install a thin metal plate between the phone and the phone housing to use the product. High magnetic force provides a firm grip, preventing the device from falling out. Small size does not block visibility and prevents the product from taking up a lot of space. Specification:Material: PC + ABS + siliconeSize: 64 * 42 * 61 mmWeight: 49 g

Compact, magnetic car holder for the air vent. Excellent visibility while drivingCompact size and convenient installation to the air vent does not block visibility. Using the handle does not obstruct the air flow from the air vent. Strong adhesionFour strong magnesia ensure a stable adhesion. Even on bumpy roads, the smartphone will not fall out of the holder. One- hand operationYou can mount the smartphone in the holder with one hand. MaterialsThe gadget's jaws are lined with flexible TPU, which prevents the airflow grille from scratching. Features:Fixing: air outlet Compatibility: universal